The first link is an original project which could be downloaded here , but just like SpeedFan, the project is not updated anymore. I searched around for an alternative software with this particular feature and only found a paid option (Angus Monitor). (My BIOS only supports CPU temperature as a temperature source for the PWM fans). I used it to bind my case fans speed to the hottest component of my PC, my GPU. The main feature I used was the custom fan curves with custom temperature sources. They will return to 0% if the temperature is 65 C or less.I built a new custom UI on top of OpenHardwareMonitor with additional features, mainly linear fan curves with custom temperature sources.Īs you guys may know, SpeedFan is sadly not updated anymore, so newer boards are not detected properly. For example, in my curves, the fans will always spin at 100% speed if the temperature is 95 C. When the minimum or maximum temperature is reached for both of these cards, their corresponding speed will trigger. Next, you need to set a minimum speed and a maximum speed. Basically, you're telling the app, "I want my temperature to never exceed X, but it's okay if it never goes below Y." Both cards require you to set a minimum and a maximum temperature. First, let's focus on the Target and Linear cards since they're very similar to each other. I've already configured these cards to my personal preference. For case fans, you can use the hottest motherboard, CPU, or GPU sensor as it doesn't matter too much. Before you do anything, you need to select a temperature source.įor CPU fans, use one of your CPUrelated sensors (pick the one with the highest temperature to be safe).
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |